VRS+ 199 Wall Hung Condensing Water Heater
 
Heat Capacity: Modulating 19,900-199,000 btu/h
UEF: 0.96
Flow Rate: 5.1 gpm - 11.2 gpm (dependent on temp rise)
Dimensions: 18.1" x 27.6" x 11.6"
Weight: 75lbs
Installation: Indoor/Outdoor
Venting: Forced draft direct vent
Ignition: Electronic
Water Pressure: 15 - 150 psi
Supply Pressure: Natural Gas 3.5"-105." wc / Propane Gas 8"-13" wc
Minimum Flow Rate: 0.1 gpm
 
CONNECTIONS
Cold Water Inlet: 3/4" NPT
Hot Water Outlet: 3/4" NPT
Recirculation Water Inlet: 3/4" NPT only on VRP Plus Models
Gas Inlet: 3/4" NPT
 
POWER SUPPLY
Main Supply: 120v ac, 60hz / Use less than 5 amp
Power Consumption: 165W
 
MATERIALS
Heat Exchanger: Stainless Steel
 
VENTING
Exhaust: 2" or 3" PVC, CPVC, Polypropylene 2" or 3" Special gas vent type BH (Class II A/B/C)
Vent Clearances: 0" to combustibles
2" Length Run: 60ft max
3" Length Run: 150ft max
 
SAFETY DEVICES
Flame Rod
APS
Overheat prevent
Freeze protection device
Exhaust temperature high limit sensor
Power Surge Fuse
 
Warranty Can be found here: Warranty